- Hands Free operation (500 mm or 1.0 metre);
- Multiple Identification (8 tags max);
- Low Cost Slim Profile;
- Single Piece Reader;
- Simple Installation;
- Indoor/Outdoor use;
- Secure Data Exchange;
- 1:100 Million Error Rate;
- Wiegand, Clock & Data or Serial Output;
- CE, DTI & FCC Approved.
The Census® "Label" reader can simultaneously interrogate tags up to 1.0 metre from the readers face. The range can be reduced to 500mm using a selector link. The RF communications between each Census® tag and reader is scrambled to eliminate the chance of simulated
tokens being used.
The "Label" reader is suitable for flush mounting directly on a wooden door when it produces a profile of 4.5mm. A 10mm spacer is provided to enable surface mounting on glass or other surfaces. The unit is designed to secure directly to a standard electrical switch back box for flush mounting on a wall. It is also suitable for pole mounting when used for car park applications.
The reader can be configured with a number of output options including "open format" 26 bit Wiegand, special format Wiegand or Clock & Data. These outputs are complemented with an RS232 compatible serial output as standard, thus enabling two data acquisition systems to be
|Power requirements||6 to 18 volts DC @ 70mA|
|Dimensions||214 x 163 x 4.5mm|
|Temperature range||-20°C to +60°C (non condensing)|
|Housing||Black ABS with Polycarbonate label insert|
RED internally controlled
|Output Formats||ELC1 - Standard 26 bit Wiegand
ELC2 - Customer specific formats
(Wiegand, Clock & Data and Serial Data)
|Terminations||10 way screw terminal|
Reading ranges vary with the type of tag and the reader model used, please refer to the Census® Products Matrix for further information..
The product is suitable for numerous applications, they include but are not limited to:
- Hands Free Access Control;
- Car Parking Control.
Ordered as ELC1 (ELC1A - USA systems) for open 26 bit Wiegand Reader or ELC2 (ELC2A - USA systems) and any variant.